jepson logo  
phone 0114 2731151

Our Production Process

Stage 1: Pressing the Aluminium
The aluminium is placed in a jig with the original dies The jig is placed into the pressing machine.  
Stage 2: Spraying    
The border is masked off and placed in the spray booth The aluminium gets an even coat of black spray.  
Stage 3: Blocking Off & Baking
The masking tape is removed The digits are 'blocked off' removing the paint from the digits  
The plate is then baked in our custom made stove for around 30 minutes at 125 degrees to set the paint.
  made in sheffield# fbhvc trade supporter
dash Contact Us
Registered address: Jepson & Company Ltd, 44 East Bank Road, Sheffield, S2 3QN.




















made in sheffield FBHVC